Gulfcoat IN12622-A Marineblue Anti Corrosion spray Protection Coating Aerosol 12oz corrosion preventative inhibitor formulated to improve adhesion, moisture resistance, UV protection Modine

Gulfcoat IN12622-A Marineblue Anti Corrosion spray Protection Coating Aerosol 12oz corrosion preventative inhibitor formulated to improve adhesion, moisture resistance, UV protection Modine
Use: Developed in response to customer demand for a protective coating to be applied on small jobs and or in remote areas. Original Designed for HVAC Coil, can be applied to any surface
Corrosion Resistance: Products have a robust synthetic multi-polymer resin backbone that is suitable for most environments and will maintain its appearance after many years exposure to the elements
UV Degradation: Built in enhanced UV inhibitors form a protective barrier throughout the paint film. As a result, UV degradation of individual polymer molecules are reduced and the film integrity maintained
Gloss Retention: A high gloss finish is applied that is smooth, limits dirt and debris buildup, and allows for easy equipment cleaning
Resistance: Corrosion durability shall be confirmed through testing to no less than 5,000 hours salt spray resistance per DIN 53167 (ASTM B117-11) using aluminum test coupons
Volume : 0.034608373 FTQ

Weight : 1.5 LBR
Model : IN12622-A
UPC-EAN : 850021531003

GulfCoat Corrosion Coatings were developed in response to a demand for a protective, anti-corrosion coating that could be applied to small units at installation time or later. GulfCoat Corrosion Coatings are formulated to resist corrosion with improved adhesion, plus moisture and UV resistance. Applying a GulfCoat Corrosion Coating protects HVAC/R systems and equipment so they will enjoy a longer service life and lower the total cost of ownership, while maintaining a higher level of efficiently throughout its life cycle.

Specially formulated to reach deep into the evaporator and condenser heat transfer coil fins, GulfCoat Corrosion Coating penetrates deeply to ensure complete coverage when properly applied. It sprays on evenly without excessive buildup or oversaturation that can clog vital portals and air passages and reduce system efficiency. GulfCoat decelerates corrosion on the non-ferrous metal fins and tubes, extending the HVAC/R equipment life while helping to maintain good air flow efficiencies along with easier coil cleaning and maintenance.

Benefits

Easy to apply on-site or at your premises

Coating Flexibility for improved air flow

Provides effective moisture barrier

Provides for easy maintenance

Reduces major maintenance and replacement costs – especially in corrosive environments

Corrosion Resistance

GulfCoat Corrosion Coatings have a robust synthetic multi-polymer resin backbone thats suitable for most environmental conditions and will maintain its appearance after many years of exposure to the elements.

UV Resistance

Enhanced built-in UV inhibitors form a protective barrier throughout the coating film. As a result, UV degradation of individual polymer molecules are reduced, and the film integrity maintained.

Gloss Retention

GulfCoat Corrosion Coatings provide a high gloss finish that is smooth, limits dirt and debris buildup and allows for easy equipment cleaning.

Two Formulations to Get The Job Done

Spray Applied OR Aerosol Spray

Whether using aerosol can or spray equipment application, both versions are available in three colors – Blue, Clear, and Gold. These anti-corrosion coatings are specifically designed for protecting HVAC/R coils, components, and cabinets.